Get Free Insurance Quotes

Get a Free Quote

Terms & Conditions | Privacy Policy

Get Esurance Insurance Quotes

Get Allstate Insurance Quotes

Get $100 Off Your Auto Deductible When You Sign Up

Get Health Insurance Quotes

Services

Posts Tagged ‘Construction’

Most Used Health And Safety Tips For All Gutter Cleaning Businesses

Tuesday, July 27th, 2010

Statistics show that Ladders are the reason for several hundreds of major injuries to employees, every 12 months. Behind most of these disasters, lies the failure to equip workers with Health and safety tips for all gutter cleaning businesses. Listed right here are essential tips that workmen must be kept in the know.

Purchasing new Ladders: Be mindful of sleek grounds or floors; wet, slippery and the like. Endeavour to study item labels, tags and descriptions when buying them. Ladder makers do disclose essential information such as, the nature of their product, and what kind of ground it could be utilised on.

In planning to purchase a Ladder, you will need to anticipate the worst kind of work environment. Be sure the intended Ladder can match the work environment.

Setting up Ladders: Never use a Ladder except on a firm ground or floor. Otherwise, you may have to use a board to help shed the load. Use a floor or ground that is level or flat. Use solid surfaces like floors or paving slabs. They should not be oily, greasy or slippery; they must be clean, without any loose materials. This will enable a firm grip of the surface by the feet of a Ladder.

Establishing the Ladder: In no way use a Ladder except on a solid ground or floor. In default, you might need to use a board to assist in spreading the load. You will need a ground or floor that is flat or even. Use solid surfaces, paving slabs or floors. They ought not to be slippery, nor greasy or oily. They should be thoroughly clean, and should not have any loose parts. This allows for a good grip by the Ladder.

Where it is obvious that a worker cannot maintain a hold on the Ladder except only briefly, then other protective measures has to be applied to avoid a fall. This is a critical tip never to be underestimated.

Avoid holding items while climbing: There are many kinds of tool-belts. You can get those that are suitable for the item you need to take up on Ladders. Where you are to take an item up, be sure to have one of your hands free to take grip of the Ladder.

There is an urgent need to stop or at least, minimise the soaring rate of injuries due to ignorance of health and safety regulations. Management can fulfill its duty of care, acquainting workers with Health and safety tips for all gutter cleaning businesses. The result will be less accidents and higher productivity.

Are you interested to have your gutters flushed now? Well, if you are you need to consider using the gutter cleaning company in London. With our gutter cleaning service, we will have your job done correctly.


Find an Attorney FREE Now

Related Articles:

Various Health And Safety Tips For All Gutter Cleaning Businesses That Could Save Lives

Monday, July 12th, 2010

It is not just enough to accept a job and hope that all is well when you arrive. There has to be stringent assessments done beforehand and that is why you should be aware of any health and safety tips for all gutter cleaning businesses.

Your staff are the ones whom you rely on to give excellent service with satisfactory results because this is how you could get repeat work. However, do you know that you can do a lot to ensure that your staff is safe while they work and there are no health hazards, which could affect them adversely while they work on roofs or anywhere where gutters are installed?

Having said that, you could follow some of these tips to streamline your services:

You should constantly develop new strategies on how to tackle those insanely high gutters or how to overcome hazardous working environments. For this, you need a dedicated safety officer or manger whose responsibility it is to install a culture of safety within the company

Ensure that you employ your staff directly without using a third party and know what their capabilities are, because you do not want someone who put other staff members at risk. Give new staff members a proper induction so that they become familiar with your safety practices and company procedures. Develop ongoing training with good certification, which will give you peace of mind and ensure their own safety and that of others while they are on the job.

Before any job commences, a competent team leader or even you personally must do a site-specific risk assessment. To cover yourself and those involved in the operation, all concerns must be noted and added to the contract. Things like exposure to toxins or worn gutters need to be addressed before sending your staff in for the clean up.

Inform your client that should working practices be hampered or withheld due to his interference or lack of cooperation, then he would be held responsible for damages, injuries or death. However, to overcome this, your staff should have a detailed work plan and schedule, highlighting dangerous zones or even no-go zones, and be aware of worn gutters which can cause potential injuries.

Many times the governing body of your industry will issue a new Working at Height Law and this should be relayed to you soonest. This will help you decide whether you want to take on a dangerous job or not.

Have a stringent safety policy that includes an environmental statement with procedures on how to monitor and comply with the safe systems of your company. Get your management team to update this regularly, so that you can comply with any new legislation and requirements. These Health and safety tips for all gutter cleaning businesses could help you maintain your customers and secure new ones.

The windy season brings the need for a gutter cleaning service. Find a trusted gutter cleaning company in London, to spare your money and time this season.


Find an Attorney FREE Now

Related Articles:

Blasting the Bridge Keepers: a Construction Expert Denounces the Ntsb’s Report on the I-35w Bridge Collapse

Friday, December 25th, 2009

 Blasting the Bridge Keepers: A Construction Expert Denounces the NTSB’s Report on the I-35W Bridge Collapse—and the “Public Servants” Who Keep Dropping the Ball

An NTSB report over a year in the making cites faulty gusset plates as the cause of the 2007 Minnesota bridge collapse. But the report contains a glaring sin of omission: It ignores key problems inherent in our nation’s infrastructure oversight system that continue to put the public in danger every day.

By Barry LePatner

 It’s been more than a year since the collapse of the I-35W bridge in Minneapolis. And now, the final report put forward by the National Transportation Safety Board has concluded from its investigation: (1) the steel gusset plates originally designed in the mid-1960s to reinforce the bridge’s joints were half an inch too thin; (2) the probable causes for the collapse were additional modifications to the original design, which added substantial weight to the bridge, and the weight added by construction materials placed on the bridge by a contractor just prior to the collapse. That’s it. And if you’re thinking Surely, there was more to the collapse than that, you are right. And by ignoring the other (extremely critical) factors, the NTSB is perpetuating a problem that puts millions of Americans in danger every day.

The NTSB is severely neglecting its duty to protect Americans. By placing the sole blame for the bridge collapse on the gusset plates and the added weight factor, the Board has ignored the inefficiency and irresponsibility among the government agencies responsible for the bridge, which also contributed to the disaster.

At the heart of many of these problems is the Minnesota Department of Transportation, which (and here’s a scary thought!) has long been considered one of the better state transportation departments in the country. Basically, MnDOT failed to protect the public from a preventable disaster that was long in the making. And the problems faced by MnDOT are far from isolated. DOTs everywhere are struggling to keep the highways and byways that connect this nation in working order.

We must put these struggles in perspective: There are 12,000 bridges in our country whose designs are similar to the I-35W Bridge. Furthermore, according to statistics from a 2007 U.S. Department of Transportation/Research and Innovative Technology Administration report, there are over 72,000 bridges that are labeled “structurally deficient” and over 81,000 bridges identified as “functionally obsolete.” Every one of these bridges needs detailed inspections to ensure their safety.

One important factor contributing to the poor state of America’s infrastructure is the seeming irresponsibility and inefficiency exhibited by those who have been elected or appointed to government positions that supposedly exist to ensure the safety of the public. To illustrate, here are several red flags that I have identified that should have warned MnDOT and other officials that the I-35W bridge was in trouble, but instead were ignored, misunderstood, or simply not acted upon in time:

*The I-35W bridge was first rated as “structurally deficient” in 1990. Despite annual reports describing a continuing section loss and build up of corrosion at key places, as well as the attention of a number of consultants who recommended substantial remedial action be taken, at no time between 1990 and its collapse in 2007 was the I-35W bridge’s condition ever raised above its “poor” rating.

*Photographs exist of gusset plates “bowing and arcing” as early as 2003, but the photos, taken by MnDOT consultants, were apparently dropped into a file folder and forgotten. MnDOT inspecting engineers did not deem these red flags to be serious enough to command attention.

*In 1996 a bridge on I-90 outside of Cleveland with a structure similar to the I-35W bridge collapsed as a result of improper gusset plate design. But although a) Federal officials investigated this serious failure, b) an official report from outside engineers was filed indicating that the gusset plates did indeed contribute to the bridge’s collapse, and c) Civil Engineering magazine published an article in 1997 detailing the Ohio bridge collapse, officials at MnDOT denied ever having heard of the Ohio bridge failure and said they were unaware of any prior problems with gusset plate design.

*Discussions concerning the need to add redundancy to the I-35W bridge had been underway years earlier—but action was never taken. And, in fact, MnDOT instead scheduled redecking work that overloaded sections of the bridge, and, according to the NTSB, contributed to the eventual failure of the gusset plates. 

Of course, none of this is meant to imply that Minnesota is the only state experiencing serious problems with its infrastructure. The Colorado Department of Transportation has acknowledged that the cost to replace or rehabilitate 125 state bridges rated in poor condition in the state is $1.4 billion. Yet, bridge repair funding, a critical element in reducing the number of bridges that are considered structurally deficient, has been reduced from $32 million in 2007 to $18 million for 2009.

Or consider a story out of Georgia in which reports identifying several bridges as hazardous were thrown away. Why? Because the official in charge said handling the problem would have required too much paperwork and involved too many people. Stories like this one are clear indications that Minnesota isn’t the only state that has had its political head in the sand regarding its infrastructure problems.

Clearly, solving our infrastructure crisis will require more than a few patches here and there. In 2005 the American Society of Civil Engineers (ASCE) estimated that the cost of making the upgrades, repairs, and expansions needed on the U.S. bridge system will be $9.4 billion/year for twenty years. The report also said the U.S. road system required $92 billion/year for maintenance and $125.6 billion/year for improvements—an updated report from the ASCE next year will likely reflect an even larger cost for these repairs.

And even if our cash-strapped government could come up with the money and ensure that it’s properly applied, there’s little indication that builders could get it done at that price. The construction industry itself has been rife with problems for quite some time now, wasting an estimated $120 billion each year. Those problems have easily flooded over into public projects, the prime example being the Big Dig and its billions of dollars in cost overruns.

We must begin taking steps, right now, to shore up America’s infrastructure. Not to do so is to invite more death and destruction. Every engineer in the field of bridge design can testify that the corrosive effects of inadequate maintenance of our bridges and tunnels will only get worse—they are not self-healing. And while the problem is far too massive and widespread to repair overnight, we can take steps now to start chipping away at it.

We must do everything in our power to end the downward spiral of our nation’s infrastructure. As the incoming Obama Administration prepares to tackle America’s ailing economy, it should make repairing the nation’s infrastructure an important part of those plans. Doing so will not only help prevent future catastrophes; it will actually contribute to our nation’s prosperity.

Every $1 billion in infrastructure spending is estimated to create 47,000 new jobs, a critical factor at a time when our unemployment rate is at a 14-year high. By taking the steps necessary to tackle our infrastructure problem now, we have an opportunity to improve our economy with the great ROI of a better, safer infrastructure system that will lead to a stronger nation.

# # #

About the Author:

Barry B. LePatner is the founder of the New York City-based law firm LePatner & Associates LLP. For three decades, he has been prominent as an advisor on business and legal issues affecting the real estate, design, and construction industries. He is head of the law firm that has grown to become widely recognized as one of the nation’s leading advisors to corporate and institutional clients, real estate owners, and design professionals.

Mr. LePatner is widely recognized as a thought leader in the construction industry. His new book, Broken Buildings, Busted Budgets: How to Fix America’s Trillion-Dollar Construction Industry (The University of Chicago Press), which was reviewed in the Wall Street Journal, has created a national debate among owners, designers, and other key stakeholders. Mr. LePatner has been featured in BusinessWeek, the Boston Globe, the New York Times, Crain’s New York Business, the Chicago Tribune, and other prestigious publications. His articles and speeches on the perilous state of our nation’s infrastructure have garnered him widespread attention. He has appeared on many television and radio broadcasts, including a CNBC appearance and several National Public Radio segments. A November 2007 Governing Magazine article stated, “If there’s a guru of construction industry reform, it’s LePatner.”

A nationally recognized speaker, Mr. LePatner has addressed audiences on topics central to trends affecting the real estate and construction industries at recent events sponsored by: The International Economic Forum of the Americas, the Real Estate Board of New York; FIATECH, the National Realty Club, the Construction Owners Association of America, the Construction Management Association of America, the Construction Financial Management Association, and MC Consultants Inc.’s Construction Defect and Construction Law Conference. He also routinely presents CLE-accredited courses to other law firms and organizations on how the construction industry actually works and how they can best protect their clients from the vagaries of the construction process.

LePatner co-sponsored “Real Estate Outlook,” an annual executive seminar series for corporate and real estate leaders; “Protection, Survival, Readiness: Project Strategy in the Post-9/11 World,” a seminar presented to institutional, developer, and corporate real estate executives; and “Secure Space,” a building security seminar for corporate owners and developers. He has also presented “Construction Cost Integrity: Equitable Risk Allocation Agreements” and “Protecting the Owner from Pitfalls in Today’s Construction Projects,” a series of Continuing Legal Education lectures to law firms and their in-house real estate departments; and the highly successful “Marketing for Design Professionals” course at the Harvard Graduate School of Design’s Summer Program, from 1990-2004 with A. Eugene Kohn, founder of KPF Associates.

Mr. LePatner has written extensively and is widely quoted in the media on the subject of construction law. He previously co-authored the legal sections of the Interior Design Handbook, McGraw-Hill 2001, and Structural & Foundation Failures: A Casebook for Architects, Engineers & Lawyers, McGraw-Hill 1982, with Sidney Johnson, P.E.

Recently published articles include: “Sarbanes-Oxley’s Wake-Up Call to the Construction Industry,” The CPA Journal, December 2007, co-authored with Henry Korn, Esq., and Anthony Chan, CPA; “Today’s Construction Contracts: Drafter Beware,” Legal Times, September 2007; “The Industry That Time Forgot,” Boston Globe, August 2007; “Construction Cost Increases: Owners Should Know the Difference Between the Myths and Realities,” New York Real Estate Journal, October 2006; and “Are You Prepared—Disaster Management Plans Help Owners Protect Their Investments” in the March/April 2006 issue of Commercial Investment Real Estate magazine. Articles published in the New York Law Journal include: “Caveat Advocatus—Drafting Construction Agreements for Your Client’s New Construction Project Ain’t What It Used to Be,” March 27, 2006; “Insuring a Construction Project Against Water and Mold,” October 25, 2004; “Building Security Measures and Owner Liability After Sept. 11,” May 1, 2003, co-authored with Henry Korn, Esq.

In May 2002, LePatner was elected by the American Institute of Architects to receive an Honorary AIA Membership, one of the highest honors the organization can bestow upon an individual who is not an architect and which is granted to those who have devoted their careers in service to the architectural profession.

In July 2001, LePatner was elected to the Board of Trustees of DIFFA, the Design Industries Foundation Fighting AIDS. He has also served on numerous advisory committees, including: the Advisory Board, Society for Marketing Professional Services, 1990-93; the board of the New York Building Congress; Board of Advisors, Legal Briefs for the Construction Industry, 1981-89; American Institute of Architects Advisory Committee, 1984; and the National Academy of Sciences, 1984-85. He is a member of the Association of the Bar of the City of New York, the New York State Bar Association, and the American Bar Association.

About the Book:

Broken Buildings, Busted Budgets: How to Fix America’s Trillion-Dollar Construction Industry (The University of Chicago Press, October 2007, ISBN-13: 978-0-226-47267-6, ISBN-10: 0-226-47267-1, $25.00) is available at bookstores nationwide, from major online booksellers, and direct from the publisher at www.press.uchicago.edu.

For more information, please visit www.brokenbuildings.com.


Find an Attorney FREE Now

Related Articles: